Whenbattery LED turns steady blue, press and hold the F2 key. While still pressing & holding F2 key, turn the machine on. Don't let go of F2 key till the BIOS menu appears. If you previously set a supervisor password, this must be entered. In the BIOS Information tab, your HDD or SSD should be listed. Helloeveryone. I need help. I can't enter BIOS after activated Legacy mode. My device is Acer Aspire V5-471. I've turned off Fast Boot at power management. Every I press F2, it still boot Windows without enter BIOS mode. Thanks. [Edited the thread to Poweryour computer off. Connect the OS recovery and restore USB key to a USB connector on your computer. Power your computer on and press the F2 key when the splash screen first appears. From the BIOS, use your arrow keys to move and highlight the Boot menu. In the Boot list make sure that the first device is the USB HDD followed by a updatingbios on Acer Aspire One: symon1980: Linux - Hardware: 4: 05-12-2009 11:35 AM: Problem with Acer Aspire 5730Z - Bios level: Ashkandi: Linux - Laptop and Netbook: 1: 10-24-2008 05:41 PM: cant enter BIOS setup: alsharifhoussam: Linux - Software: 6: 12-05-2006 01:03 PM: Acer Aspire 5004WLMi, can bios update solve Onstartup my Acer Aspire TC-885 goes straight to the Bios Setup Utility. On startup in the bottom left of the display is the message, “Entering BIOS Setup Menu”, and BIOS is immediately entered, without the usual brief prompt to enter BIOS. Tryingto fix an Aspire E1-531. BIOS previously had password set - which I KNEW. Tried disabling BIOS password by entering current password then pressing [Enter] as 'new password' and 'confirm password' BIOS is still password protected - and it now won't accept EITHER password. Help! [edited to comply with guidelines] Turnon your Acer Aspire S3 and press the "F2" key a few times at startup to bring up the InsydeH20 Setup Utility screen. As soon as you power on your device, press the F2 key to enter BIOS Setup. Use the arrow keys to navigate to the Boot tab. Select the device you want to boot from. Press the F10 key to save and exit BIOS Setup. Answers To enter BIOS on the TC 605 you need to press the delete key as soon as you see the Acer splash screen. The easiest way to enter setup is to press and hold the power key for 10 seconds (until the system powers completely off). Then, power the system on, and start pressing the delete key immediately. You can tap the key several times if TrythisExtract Bios File prepare an USN Stick Fat32 Formatted. and copy It into then ReBoot and plug the USB Stick into any port and press. the Recovery Acer Keys Fn + ESC- Shutdown the netbook (notebook) - Remove all peripheral devices. aZf94v.

acer aspire enter bios key